Skip to content

Every electrical service — residential & commercial

Every service.One crew.

Switchboards to battery storage, fit-outs to fault-finding. One licensed crew, fixed quotes in writing, and workmanship guaranteed for life on residential work and twelve months on commercial.

RESHomes & renovations

For home.

Rewires, switchboards, downlights, EV chargers, smoke alarms. Fixed quotes, licensed crew, no subcontractors.

Residential services

COMFit-outs & sites

On site.

Fit-outs, data cabling, emergency lighting, test & tag, switchboard upgrades. Compliance paperwork included.

Commercial services

02What we do

We do it all.

Licensed electricians for residential and commercial work right across Greater Melbourne, busiest in the eastern suburbs. Every card links to the scope, what's included, and what it usually costs.

RESHomes & renovations · 26 services

RES.01

EV Charger Installation

Just bought an EV and want proper charging at home instead of a slow trickle from a power point? We install dedicated chargers for all major brands across Melbourne, with most home installs done in half a day.

View
RES.02

Home Rewiring

Rewiring an older home brings it up to modern electrical safety standards and gives you the capacity for today's appliances. We handle full and partial rewires across Melbourne's eastern suburbs, working zone by zone so you usually have power back each evening.

View
RES.03

Smart Home Automation

The right time to wire for smart home is rough-in: zoned lighting, automated blinds, distributed audio, network backbone, climate integration. We work alongside builders, AV integrators and home automation providers from design stage through to commissioning, and retrofits into existing homes are feasible too.

View
RES.04

Switchboard Upgrades

Old ceramic fuse boards are a safety and fire hazard. We upgrade them to modern circuit breaker panels with safety switches on every circuit, typically in a single day with a planned power-off window of a few hours.

View
RES.05

Emergency Electrician

Smelling something burning at the switchboard or lost power to half the house? We respond to urgent electrical faults across Melbourne, fastest through the eastern suburbs where we're based, typically on-site within 1 to 2 hours.

View
RES.06

Safety Switches & RCDs

A safety switch can save your life, and many older Melbourne homes have one on only a circuit or two. We install, test and certify RCDs on all circuits, usually at short notice.

View
RES.07

Smoke Alarm Installation

Every Victorian home needs working smoke alarms, and new builds and major renovations need hardwired interconnected ones. We install, test and certify compliant systems across Melbourne's eastern suburbs, usually in a single visit.

View
RES.08

Solar & Battery Systems

Solar and battery installation is a specialist trade with its own accreditation. We don't install solar ourselves; we refer you to trusted CEC-accredited partners and handle all the surrounding electrical work, usually within days of your enquiry.

View
RES.09

Fault Finding & Repairs

Got a breaker that keeps tripping, a dead power point, or lights that flicker for no obvious reason? We diagnose electrical faults systematically and fix the root cause, usually within the first visit.

View
RES.10

Lighting Installation

Good lighting transforms a space. We handle everything from downlight installation to full lighting design, supply, and fit-off for homes and commercial premises across Melbourne, and most replacement jobs are done in a single visit.

View
RES.11

LED Lighting Upgrades

Replace ageing halogen and fluorescent fittings with modern LEDs: quieter, cooler, far cheaper to run, and better light once the right colour temperature and dimmer are paired with the fitting. We assess your existing fittings and dimmers free, and most homes are done in a single visit.

View
RES.12

Power Points & Circuits

Never enough power points? We install new GPOs, USB power points, outdoor power, and dedicated circuits for appliances across Melbourne's eastern suburbs, with most jobs done in a single visit.

View
RES.13

Electrical Safety Inspections

A thorough electrical inspection identifies hazards and compliance gaps before they become a fire or an injury. Pre-purchase, pre-renovation, or simply periodic: done properly, the report saves more than it costs. Most inspections take 1.5-3 hours and the written report follows within 2 business days.

View
RES.14

Ceiling Fan Installation

Want cooler rooms without the air-con running costs? We supply and install ceiling fans across all room types and ceiling heights, including raked, vaulted and stairwell installations, with most standard installs done in about an hour.

View
RES.15

Induction Cooktop Installation

Switching from gas to induction takes a dedicated 32A circuit from the switchboard and often a board capacity check. We handle the full conversion across Melbourne's eastern suburbs, coordinating the plumber for the gas isolation, with most jobs wrapped in a day.

View
RES.16

Home Backup Generator Installation

Storms regularly knock out power across Melbourne's eastern suburbs for days at a time. We install backup generators with automatic transfer switches that bring your essential circuits back within seconds, and we handle the whole job from sizing to COES.

View
RES.17

TV Wall Mount Installation

Mount your TV cleanly with all cables concealed in-wall: power, antenna, HDMI and network. The result looks built-in rather than retrofitted, and a standard install typically runs 2-3 hours.

View
RES.18

Data & Structured Cabling

Need wired data points for a home office, media room or small office fit-out? We design and install Cat6 and Cat6A structured cabling that's tested, certified and documented, with most homes done in a single visit.

View
RES.19

CCTV & Security Cameras

Want cameras that will actually record usable footage when it matters? We install hardwired IP CCTV systems for homes and businesses across Melbourne, planned around your property and usually quoted within a couple of days.

View
RES.20

Security Alarm Installation

Reliable security alarm systems for homes and businesses across Melbourne's eastern suburbs: hardwired for reliability, with optional back-to-base monitoring. Most installs take a single day, and we start with a site walkthrough before specifying any equipment.

View
RES.21

Rental Electrical Safety Checks

Victorian law requires an electrical safety check on every rented residential premises every 2 years. We do these for individual landlords and at scale for property managers: fast turnaround, COES on completion, photographic record retained.

View
RES.22

Renovations & Extensions

Renovating or extending? We handle every stage of the electrical work, from rough-in during construction through to fit-off, commissioning and certification, and we coordinate directly with your builder so you don't have to.

View
RES.23

New Home Electrical

We do the full electrical for new home builds across Melbourne: rough-in, fit-off, hardwired smoke alarms, RCBO-protected switchboards sized for the next decade, and the surveyor documentation at each stage. We work to your builder's program, or directly with you as an owner-builder.

View
RES.24

Granny Flat & Second Dwelling Electrical

Building a granny flat or second dwelling and need the electrical sorted? We scope the lot across Melbourne: sub-main or separate metering, a dedicated switchboard, hardwired smoke alarms and the Certificate of Electrical Safety on completion.

View
RES.25

Apartment & Unit Electrical

Own an apartment, unit or townhouse that needs electrical work? We handle everything from a couple of power points to switchboard upgrades and basement EV charging, working around your day and keeping the owners corporation in the loop where the job touches common property.

View
RES.26

Older Home Rewiring & Heritage Electrical

Older Melbourne homes need an electrician who can tell the genuinely dangerous wiring from the original detail worth keeping. We rewire and upgrade Edwardian, Federation, Victorian and inter-war houses across Hawthorn, Camberwell, Kew and Surrey Hills, and most jobs start with a free inspection.

View

COMFit-outs & sites · 23 services

COM.01

Commercial Solar & Battery Systems

Looking at commercial solar or battery storage? We refer the PV and battery scope to CEC-accredited commercial partners and handle the surrounding electrical work ourselves: switchboard upgrades, sub-mains, metering and EV integration.

View
COM.02

Thermographic Inspection

Annual infrared inspection of commercial switchboards, distribution boards, MCCs, busbars, cable terminations and solar PV: finding loose lugs, phase imbalance and stressed contactors before they fail. Severity-classified written reports suitable for insurer audits and asset records, with no shutdown required.

View
COM.03

Office & Retail Fit-Outs

Fitting out an office, retail or hospitality tenancy on a builder's programme? We deliver the complete electrical installation, from mains and switchboard to data and emergency lighting, working to your schedule with written progress updates.

View
COM.04

Commercial Emergency Response

Lost power to a tenancy, smelling something burning at the board, or watching refrigerated stock warm up? We respond to commercial electrical emergencies across Melbourne, typically on-site within 1 to 2 hours in the eastern suburbs, with make-safe and diagnosis before the next business day.

View
COM.05

Commercial Switchboard Upgrades

Running a commercial site on an out-of-life main switchboard or overloaded sub-mains? We replace and upgrade MSBs and distribution boards to AS/NZS 61439, coordinated with the distributor and scheduled around your trading hours.

View
COM.06

Maintenance Contracts

Ongoing electrical maintenance keeps your building safe, compliant, and operating without expensive emergency call-outs. We offer fixed-price maintenance contracts for commercial and strata clients, with priority response for urgent work built in.

View
COM.07

Strata & Owners Corporation Electrical

Common-area electrical for owners corporations and strata buildings: lighting, basement and foyer power, emergency lighting (AS/NZS 2293), main switchboard maintenance, and basement EV-bay coordination. Invoiced to the OC, line-itemed by job, and scheduled after hours to avoid resident disruption.

View
COM.08

Test & Tag Compliance

Electrical test and tag for workplaces across Melbourne's eastern suburbs: scheduled, documented, and compliant with AS/NZS 3760. We work around your trading hours and hand over a written register after every visit.

View
COM.09

Commercial Fault Finding & Repairs

Got a fault disrupting trading that needs a permanent fix, not a reset-and-hope? We diagnose and repair commercial electrical faults with thermal imaging, three-phase analysis and leakage logging, and leave you a written incident report.

View
COM.10

Commercial Smoke Detection & Fire Alarms

Need a fire detection system designed, installed or serviced for a commercial building? We deliver AS 1670 systems with AS 1851 routine service contracts, working with fire safety engineers where the design requires it.

View
COM.11

Commercial LED Lighting Upgrades

Paying too much to light an office, warehouse or retail site? We design and deliver commercial LED retrofits with VEU rebate paperwork handled for you, controls integration where the maths works, and after-hours installation so trading continues.

View
COM.12

Commercial Electrical Safety Inspections

Due for a periodic inspection, an insurer audit, or checking a building before purchase? We inspect commercial premises across Melbourne and deliver a written report graded by urgency that insurers and building managers can act on.

View
COM.13

Hospitality & Cafe Electrical

We do the electrical for cafes, restaurants, bars and commercial kitchens across Melbourne: three-phase oven and coffee-machine runs, exhaust interlocks, wet-zone RCD protection and service-area dimming. Fit-outs and refits are scheduled around your trading hours, with after-hours and weekend work standard.

View
COM.14

Commercial Lighting Installation

Planning lighting for a new office, retail or hospitality tenancy? We design the layout to AS/NZS 1680, specify the controls, and install to the builder's programme with a certified handover.

View
COM.15

Commercial Power Points & Circuits

Adding kitchen equipment, desk pods or machinery that your current circuits can't carry? We install commercial GPOs, dedicated circuits and three-phase power points across Melbourne's eastern suburbs, scheduled after hours so trading continues.

View
COM.16

Commercial Data & Structured Cabling

Fitting out an office, warehouse or retail tenancy and need the network cabling done properly? We design and install structured cabling to AS/NZS 3080 with every port Fluke-certified, working after hours so your site keeps running.

View
COM.17

Commercial Safety Switches & RCDs

Auditing a commercial board that predates modern RCD requirements, or adding solar or EV charging that changes the protection you need? We install, replace and certify commercial RCDs and RCBOs to current code, with documented test results.

View
COM.18

Commercial CCTV & Security Cameras

Need camera coverage for a retail tenancy, warehouse or multi-tenancy building? We design and install commercial IP CCTV with PoE structured cabling and locally hosted recording, installed after hours so your site keeps trading.

View
COM.19

Commercial Security Alarm Installation

Need an alarm system for a retail, warehouse or multi-tenancy site that actually integrates with your CCTV and access control? We install addressable commercial alarm systems with back-to-base monitoring, staged after hours on active sites.

View
COM.20

Childcare Centre Electrical

Running a childcare centre or kindergarten and facing an assessment visit or a fitout? We handle compliance upgrades, new fitouts and defect rectification around your operating hours, with the paperwork bundle your assessor will ask for.

View
COM.21

Medical & Dental Practice Electrical

Medical and dental electrical is genuinely specialist work: AS/NZS 3003 patient-area classification, equipotential bonding, and dedicated circuits for sterilisers, X-ray and chair-mounted equipment. We install it so the audit passes the first time, and most compliance work in operating practices runs after hours or on your closed days.

View
COM.22

Warehouse & Industrial Electrical

Industrial electrical is plant-availability work: every hour the line is down has a number attached. We do three-phase plant, VSD installations, high-bay lighting and breakdown response, with shutdown work scheduled into night shift or planned maintenance windows.

View
COM.23

Aged Care & Retirement Living Electrical

Running an aged care facility or retirement village and need electrical work that won't disrupt residents? We handle new fit-outs, compliance upgrades and accreditation rectification in occupied facilities, with after-hours scheduling available.

View
03 / GET IN TOUCH

Not sure
what you need?

Call straight through or drop a line. We'll work out scope with you — no pushy sales, just a fixed-price quote in your inbox.